Xiamen Hysen Imp&Exp Co., Ltd.

V5016 Series Two-way Cutting Couplling Motorised Valve

V5016 Series Two-way Cutting Couplling Motorised Valve
Product Detailed

1) Two-way Cutting Couplling Motorised Valve
2)Reasonable structure valve
3)Reliable seal valve
4)Good performance valve

V5016 Series Two-way Cutting Couplling Motorised Valve

General
V5016 Series Motorized Valves are used to control the flow of hot water, freezed in heating cooling or air-conditioning applications so as to control roo temperature indirectly. It is made up of Actuator and Valve body. The valve is closed, configurations of valve body are closed off; The thermostat (NTC) transfers a signal to actuator that will connect to power, and then open valve, input hot water or freezed water to fan coil unit; If the room temperature reaches to set-point, thermostat transfers a signal to actuator to cut off the power, and spring switch returan, valve is closed, and the hot or freezed water is block to fan coil unit. Therefore, the room temperature could be controlled in the set-point through valve opened or closed.

Characteristics
Smart, everlasting, less noise and able to work under high temperature environment.

Technical Data
Size: 22mm, 28mm
Liquid Temperature: 5~88º C
Work Medium: Chilled/hot Water
Ambient Temperature: <52º C
Pressure: 1.6Mpa
Power Supply: 220V (± 10%)50-60Hz

Applicable
If the motorized valve is applied for high building, should arrange another valve to reduce the pressure on the branch pipe in the bottom.



Copyright Notice @ 2008-2013 B2BAGE Limited and/or its subsidiaries and licensors. All rights reserved.